Imaging developer Princeton Infrared Technologies Inc.
has appointed Bob Struthers as its director of sales and
Struthers brings more than 35 years of experience in
the photonics industry. He began his career at EG&G
Inc. in its Reticon and Electro-Optics divisions, where
he was directly involved with the company’s first silicon
and InGaAs photodetector product lines. He also served
as vice president of sales and marketing at Sensors Unlimited for 15 years.
Princeton Infrared Technologies develops InGa As imaging technology and SWIR linescan cameras.
Sensor? Housing? Lens;holder?
Plug orientation? It´s your choice!
The uEye LE USB 3.1 Gen 1
ORIEN TATION MIC OPTION
Additive manufacturing systems provider Optomec will integrate its LENS
Print Engine into Tongtai Machine &
Tool Co.’s AMH-350 vertical milling
The AMH-350 is a high-accuracy, five-axis machining center that reduces setups and increases accuracy for multi-sided and complex parts. The LENS line
of 3D metal printers has been used in
industry for over two decades to cost-Industrial 3D printer manufacturer
German RepRap GmbH has chosen
Millénium 3D as its first French value-added reseller for its industrial 3D
Millénium 3D says it anticipates
strong demand for 3D printing technologies in France.
“We enter the world of additive manufacturing because this technology pushes
the boundaries of the traditional manufacturing,” said Franck Michaud, presi-Lidar sensing technology developer LeddarTech Inc. and signal technology developer Integrated Device Technology
Inc. have agreed to jointly develop and
supply the LeddarCore LCA2 integrated
A key element within an automotive
lidar system, the newest generation of
LeddarCore integrated circuits enable
solid-state implementation of high-performance, low-cost automotive systems, which are required for the mass-market deployment of semi-autonomous
and autonomous vehicles.
To manufacture the LCA2, Integrated
Device Technology will leverage its ad-
vanced expertise for component require-
ments analysis, architecture, design,
Tongtai manufactures horizontal and
vertical turning centers, tapping and mill-
ing centers, vertical machining centers,
and high-speed machining centers. Op-
tomec is a manufacturer of production-
grade 3D printers.
dent of Millénium 3D. “To be relevant
at the market, this technology needs to
be integrated and reflected by the needs
of customers, and that’s why Millénium
3D supports their customers by targeting
their needs, for example, with training
and maintenance of equipment.”
German RepRap is a developer and
manufacturer of 3D printers based on
fused filament fabrication. Millénium
3D is a developer and seller of 3D print-
development, characterization, qualification and transfer. Built into the LCA2, the
patented Leddar signal acquisition and
advanced processing algorithms generate a cleaner digital signal and lower detection thresholds compared with other
lidar methods to achieve higher ranges
and sensitivity at a much lower cost.
Integrated Device Technology Inc.
develops system-level products in radio
frequency, real-time interconnect, wireless power, serial switching, interfaces,
battery management integrated circuits,
power management, sensor signal conditioner integrated circuits and environmental sensors. LeddarTech is a developer of lidar sensing technology for
object detection and ranging.
Tongtai chooses Optomec print engine
for its vertical milling machine
Princeton Infrared appoints Struthers
director of sales and marketing
German RepRap names Millénium 3D
distributor for its industrial 3D printers
LeddarTech, Integrated Device Technology partner
for integrated circuit development